Leave a bone-dry board in your workshop for a week and it will gain weight; leave a soaking-wet board and it will lose weight.
This guide explains equilibrium moisture content (EMC): the moisture level wood naturally settles at for a given temperature and relative humidity.
You will learn how EMC drives seasonal movement, why “kiln-dried” is not a final state, and how to use EMC to acclimatise timber intelligently.
By the end, you will be able to predict what moisture content your wood wants to be in its destination environment.
What EMC Actually Means
Equilibrium moisture content is the moisture content at which wood is in balance with the surrounding air.
At EMC:
- the wood is neither absorbing nor releasing moisture
- the vapour pressure inside the cell walls matches the vapour pressure in the air
- the wood is dimensionally stable at that moment
EMC is not a fixed property of the wood itself. It depends entirely on the temperature and relative humidity of the surrounding environment.
Change the environment, and the EMC changes — and the wood will start moving toward the new equilibrium.
The Two Factors That Determine EMC
<aside> 🖼️
Image placeholder: EMC concept (wood ↔ air)
</aside>
- Simple diagram showing wood exchanging moisture with surrounding air until it stabilises.
EMC is governed by:
1. Relative Humidity (RH)
<aside> 🖼️
Image placeholder: RH to EMC quick reference
</aside>
- Simple chart showing RH (30/50/65/80%) mapped to EMC (~6/9/12/16%).
This is the dominant factor. Higher relative humidity means higher EMC.
- At 30% RH → EMC is roughly 6%
- At 50% RH → EMC is roughly 9%
- At 65% RH → EMC is roughly 12%
- At 80% RH → EMC is roughly 16%
These are approximate values that vary slightly by species, but the pattern is consistent.
2. Temperature
Temperature has a smaller but real effect. At the same relative humidity, higher temperatures produce a slightly lower EMC.
In practice, relative humidity is by far the more important factor for woodworkers.
<aside> 🔬
Diagram placeholder: Graph showing the relationship between relative humidity (x-axis, 0–100%) and EMC (y-axis, 0–30%), with a smooth curve. Mark common workshop zones (heated home, unheated shed, outdoor UK conditions).
</aside>
EMC Is a Moving Target
Because temperature and humidity change with the seasons, EMC is never truly fixed.
In a typical UK home:
- Winter (heating on, dry air): RH might drop to 30–40%, pushing EMC down to around 6–8%
- Summer (heating off, more humid): RH might rise to 55–70%, pushing EMC up to around 10–13%
This seasonal swing is the root cause of many common problems:
- doors that stick in summer and have gaps in winter
- floorboards that creak in the dry season
- tabletops that develop cracks after the first winter in a heated home
The wood isn’t faulty. It’s simply following its EMC as the environment changes.
Typical EMC Ranges by Environment
<aside> 🖼️
Image placeholder: UK environments cheat sheet
</aside>
- Visual table graphic for home (heated), workshop (unheated), shed (covered outdoor), fully outdoor.
These are practical approximations for the UK:
| Environment | Typical RH range | Approximate EMC | | — | — | — | | Centrally heated home (winter) | 25–40% | 5–8% | | Centrally heated home (summer) | 50–65% | 9–12% | | Unheated workshop or garage | 55–75% | 10–14% | | Covered outdoor (shed, barn) | 65–85% | 12–18% | | Fully exposed outdoor | 70–100% | 14–25%+ |
The key takeaway: the “right” moisture content for your timber depends entirely on where the finished piece will live.
Why EMC Matters More Than “Kiln Dried”
Many woodworkers buy kiln-dried timber and assume the moisture problem is solved.
It isn’t.
Kiln drying brings timber down to a target MC — typically 8–12% depending on the supplier. But the moment that timber leaves the kiln, it begins exchanging moisture with whatever environment it’s stored in.
- Kiln-dried timber stored in a damp, unheated warehouse? It will absorb moisture and rise above its kiln-dried MC.
- Kiln-dried timber brought into a heated workshop in January? It may lose further moisture and shrink.
The label “kiln dried” tells you where the timber was. EMC tells you where it’s going.
Acclimatisation: Using EMC in Practice
<aside> 🖼️
Image placeholder: Acclimatisation workflow
</aside>
- Photo/diagram of stickered stack in the destination environment.
- Caption: “Measure → sticker → wait → re-measure.”
The practical application of EMC is acclimatisation — giving timber time to reach equilibrium with the environment where it will be used.
Good practice:
- Bring timber into the target environment as early as possible
- Stack and sticker so air can reach all faces evenly
- Allow time — days to weeks depending on thickness, species, and MC difference
- Measure MC before milling and again before final assembly
- Aim for the midpoint of the seasonal EMC range in the destination environment
For example, if a piece of furniture will live in a centrally heated UK home where EMC ranges from roughly 7% to 12% across the year, targeting around 8–9% MC at assembly is a sensible aim. The wood will still move seasonally, but the movement will be roughly symmetrical.
Hysteresis: A Subtlety Worth Knowing
<aside> 🖼️
Image placeholder: Sorption hysteresis loop (optional)
</aside>
- Simple curve showing adsorption vs desorption difference.
- Keep it visually minimal.
Wood that is losing moisture to reach EMC will stabilise at a slightly higher MC than wood that is gaining moisture to reach the same EMC.
This phenomenon is called sorption hysteresis.
In practice, the difference is small — usually 1–2% MC — and most woodworkers don’t need to calculate it. But it’s worth knowing because:
- it explains why two boards in the same room can have slightly different MCs
- it’s another reason to aim for the midpoint of the expected range rather than an exact number
Common Mistakes EMC Explains
- Building with timber at 14% for a heated home at 7% EMC. That’s a 7% MC drop — enough to cause significant shrinkage and possible cracking.
- Storing timber in a garage and expecting it to stay at kiln-dried levels. The garage EMC is likely 12–14%, so the timber will rise to match.
- Finishing one face of a board only. This causes uneven moisture exchange — one face responds to humidity, the other can’t. The board cups toward the unfinished side.
- Rushing acclimatisation. Thick hardwood boards can take weeks to reach equilibrium through their full thickness.
The Simple Rule
If you remember one thing from this guide:
<aside> 💡
Build your timber to the moisture content it will live at — not the moisture content it arrives at.
</aside>
That means knowing the EMC of the destination environment, measuring your timber, and giving it time to acclimatise before you build.
What’s Next
You now understand what moisture content is and where it settles. But what actually happens when MC changes? In Guide 3 — Why Wood Moves, we look at the physical mechanism of wood movement and why it causes so many problems in the workshop.
🔗 Knowledge Network
Species Pages
- EMC applies universally across all species — individual species pages include species-specific shrinkage data
Glossary Terms
- Equilibrium Moisture Content (EMC)
- Relative Humidity (RH)
- Sorption Hysteresis
- Acclimatisation
- Kiln Drying
- Moisture Content (MC)
Calculators
- Movement Calculator — uses EMC range to estimate seasonal movement
Categories
- Equilibrium moisture content (EMC)
- Relative humidity
- Wood movement basics
- Timber drying and acclimation
- Seasonal movement
- Measuring moisture
Related Guides
- Track 2 – Guide 1 – Moisture Content Explained — what MC is and how it’s measured
- Track 2 – Guide 3 – Why Wood Moves — what happens physically when MC changes
- Track 2 – Guide 4 – Tangential vs Radial Movement — how cut angle affects the amount of movement
- Track 2 – Guide 6 – Shrinkage and Swelling — the full picture of dimensional change