Most movement is cell-wall swelling. That’s why wide parts need cross-grain allowances, even when the board feels ‘dry’.
Imagine a bundle of drinking straws, glued tightly together. Push along the straws and they’re strong. Push across them and they buckle. That’s wood.
This guide explains what wood looks like at the microscopic level: millions of hollow, tube-like cells arranged in a highly organised structure.
You will learn the main cell types, what cell walls are made of, and how that structure explains strength, movement, and grain.
The Main Cell Types (The Useful Mental Model)
Although wood contains many specialised cell types, most timber can be understood through a few headline tissues. In hardwoods, the big three are fibres, vessels, and parenchyma. In softwoods, tracheids dominate.
Fibres
Fibres are long, narrow cells with thick walls. They provide the mechanical strength of wood — think of them as the reinforcing rods of timber.
Fibres are especially prominent in hardwoods, where they form the main structural framework. Their thick walls make wood remarkably strong in tension and compression along the grain.
Vessels (pores)
Vessels are large, tube-like cells responsible for transporting water through the tree.
As we covered in Guide 3, vessels are found only in hardwoods. They’re most obvious as pores on end grain. In open-grained woods like oak and ash, you can often also see or feel them on the surface.
The size and arrangement of vessels determines whether a hardwood has an open grain texture (large vessels, like oak) or a closed grain texture (small vessels, like maple).
Parenchyma
Parenchyma cells are used for storing nutrients within the tree. They often appear as lighter-coloured streaks or bands in the wood, sometimes forming patterns around vessels.
While less structurally important than fibres, parenchyma cells contribute to the visual character of certain species and play a role in heartwood formation (the chemical extractives that darken heartwood are stored in parenchyma cells).
Wood Cells Are Mostly Hollow
A surprising fact: much of wood’s structure is empty space. How hollow it is depends on species and density.
In a living tree, cells are filled with water and biological fluids. After drying, they become mostly hollow. This explains several key properties:
- Why wood is lightweight relative to its strength
- Why wood absorbs and releases moisture — the cell walls are hygroscopic (they attract and hold water molecules)
- Why wood is a good insulator — partly because trapped air in hollow cells resists heat transfer
When humidity changes, the cell walls absorb or release moisture, causing them to swell or shrink. This is the root mechanism behind wood movement.
What Cell Walls Are Made Of
Each wood cell has a wall built from three main components:
- Cellulose — long, strong fibres that act as reinforcement
- Hemicellulose — a matrix material that bonds cellulose fibres together
- Lignin — a natural adhesive that holds the whole structure rigid
Together, these form a natural composite — remarkably similar in principle to fibreglass or carbon fibre, where strong fibres are embedded in a binding matrix.
This composite structure is why wood has such an impressive strength-to-weight ratio.
How Cell Orientation Affects Boards
Because most cells run vertically along the trunk, the way a board is cut from the log determines how those cells are oriented within it:
Tangentially sawn boards (flat-sawn) cut across the growth rings at a tangent. These boards tend to:
- show dramatic, cathedral-like grain patterns
- be more prone to cupping during drying
- have more pronounced wood movement
Radially sawn boards (quarter-sawn) cut through the growth rings at roughly 90°. These boards tend to:
- show straighter, more parallel grain
- be significantly more stable
- display medullary rays in species like oak (the distinctive fleck pattern)
Why This Matters
You don’t need a microscope to benefit from understanding cell structure. This knowledge has direct practical consequences:
- Choosing timber: dense species with thick-walled fibres will be harder and more durable
- Reading grain: visible pores tell you the wood is a hardwood; their size hints at the species
- Predicting movement: understanding swelling across cell walls explains why flat-sawn boards cup
- Understanding finishes: open-grained woods may need grain filling before finishing
The cellular structure of wood is the hidden architecture behind everything you experience in the workshop.
What’s Next
Next: Growth Rings Explained